Welcome, guest! Login / Register - Why register?
Psst.. new poll here.
[email protected] webmail now available. Want one? Go here.
Cannot use outlook/hotmail/live here to register as they blocking our mail servers. #microsoftdeez
Obey the Epel!

Paste

Pasted as C++ by piasdom ( 14 years ago )
# EMC controller parameters for generic controller. Make these what you need
# for your system.

# General note: Comments can either be preceded with a # or ; - either is
# acceptable, although # is in keeping with most linux config files.

# Settings with a + at the front of the comment are likely needed to get 
# changed by the user.
# Settings with a - at the front are highly unneeded to be changed
###############################################################################
# General section 
###############################################################################
[EMC]

#- Version of this INI file
VERSION =               $Revision: 1.17 $

#+ Name of machine, for use with display, etc.
MACHINE =               EMC-HAL-STEP-IN

#- Name of NML file to use, default is emc.nml
NML_FILE =              

#+ Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
DEBUG = 0
# DEBUG =               0x00000007
# DEBUG =               0x7FFFFFFF

###############################################################################
# Sections for display options 
###############################################################################
[DISPLAY]

#+ Name of display program, e.g., xemc
DISPLAY =              axis
# DISPLAY =              usrmot
# DISPLAY =              mini
# DISPLAY =   tkemc
# Cycle time, in seconds, that display will sleep between polls
CYCLE_TIME =            0.200

#- Path to help file
HELP_FILE =             tkemc.txt

#- Initial display setting for position, RELATIVE or MACHINE
POSITION_OFFSET =       RELATIVE

#- Initial display setting for position, COMMANDED or ACTUAL
POSITION_FEEDBACK =     ACTUAL

#+ Highest value that will be allowed for feed override, 1.0 = 100%
MAX_FEED_OVERRIDE =     1.2

#- Prefix to be used
PROGRAM_PREFIX = /home/itt/Gcode

#EDITOR
EDITOR = gedit

#- Introductory graphic
INTRO_GRAPHIC =         emc2.gif
INTRO_TIME =            5

##PYVCP=panel.xml

###############################################################################
# HAL
###############################################################################
HAL
HALUI=halui
POSTGUI_HALFILE=postgui.hal

###############################################################################
# Filter
###############################################################################
PROGRAM_EXTENSION = .png,.gif,.jpg Grayscale Depth Image
png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode

###############################################################################
# Task controller section 
###############################################################################
[TASK]

# Name of task controller program, e.g., milltask
TASK =                  milltask

#- Cycle time, in seconds, that task controller will sleep between polls
CYCLE_TIME =            0.010

###############################################################################
# Part program interpreter section 
###############################################################################
[RS274NGC]

#- File containing interpreter variables
PARAMETER_FILE =        stepper.var

#- RS274NGC_STARTUP_CODE
RS274NGC_STARTUP_CODE = g17 g20 g40 g49 g54 g80 g90 g94

###############################################################################
# Motion control section 
###############################################################################
[EMCMOT]

#- Name of the motion controller to use (only one exists for nontrivkins)
EMCMOT =                motmod

#- Key for real OS shared memory, e.g., for simulated motion
SHMEM_KEY =             111

#- Timeout for comm to emcmot, in seconds
COMM_TIMEOUT =          1.0

#- Interval between tries to emcmot, in seconds
COMM_WAIT =             0.010

#+ Base task period, in nanosecs - this is the fastest thread in the machine
BASE_PERIOD =           50000
#- Servo task period, in nanosecs - will be rounded to an int multiple of BASE_PERIOD
SERVO_PERIOD =          1000000
#- Trajectory Planner task period, in nanosecs - will be rounded to an
#   integer multiple of SERVO_PERIOD
TRAJ_PERIOD =           10000000

###############################################################################
# Hardware Abstraction Layer section
###############################################################################
[HAL]

# The run script first uses halcmd to execute any HALFILE
# files, and then to execute any individual HALCMD commands.
# list of hal config files to run through halcmd
#+ files are executed in the order in which they appear
HALFILE =               core_stepper.hal
#HALFILE =               xylotex_pinout.hal
HALFILE =               standard_pinout.hal

#- list of halcmd commands to execute
# commands are executed in the order in which they appear
#HALCMD =                save neta

###############################################################################
# Trajectory planner section
###############################################################################
[TRAJ]
#+ machine specific settings
AXES =                  3
# COORDINATES =         X Y Z A B C
COORDINATES =           X Y Z
HOME =                  0 0 0
LINEAR_UNITS =          inch
ANGULAR_UNITS =         degree
CYCLE_TIME =            0.010
DEFAULT_VELOCITY =      0.018
MAX_VELOCITY =          .36
DEFAULT_ACCELERATION =  2.0
MAX_ACCELERATION =      2.6

###############################################################################
# Axes sections
###############################################################################

#+ First axis
[AXIS_0]

TYPE =                          LINEAR
HOME =                          0.000
MAX_VELOCITY =                  .36
# NOTE:  the step generator module applies its own limits to
# acceleration and velocity.  We have discovered that it needs
# to have a little "headroom" over the accel by the trajectory
# planner, otherwise it can fall slightly behind during accel
# and later overshoot as it catches up.  In the long term we
# hope to come up with a clean fix for this problem.  In the
# meantime, please set STEPGEN_MAXACCEL below to a few percent
# higher than the regular acceleration limit MAX_ACCELERATION

MAX_ACCELERATION =              2.0
STEPGEN_MAXACCEL =              3.0
BACKLASH =                      0.003
SCALE =                   16000
OUTPUT_SCALE =            16000
MIN_LIMIT =                     -10.0
MAX_LIMIT =                     10.0
FERROR =              1.0               <<<<<<<<<<<<-------------  changed to .05
MIN_FERROR =         0.010
HOME_OFFSET =                   0.0
HOME_SEARCH_VEL =               0.0
HOME_LATCH_VEL =                0.0
HOME_USE_INDEX =                NO
HOME_IGNORE_LIMITS =            NO
#HOME_SEQUENCE =                  2


#+ Second axis
[AXIS_1]

TYPE =                          LINEAR
HOME =                          0.000
MAX_VELOCITY =                  .36
MAX_ACCELERATION =              2.0
STEPGEN_MAXACCEL =              3.0
BACKLASH =                      0.003
SCALE =         -16000
OUTPUT_SCALE =  -16000
MIN_LIMIT =                     -10.0
MAX_LIMIT =                     10.0
FERROR =  0.050
MIN_FERROR =  0.010
HOME_OFFSET =                    0.0
HOME_SEARCH_VEL =                0.0
HOME_LATCH_VEL =                 0.0
HOME_USE_INDEX =                 NO
HOME_IGNORE_LIMITS =             NO
#HOME_SEQUENCE =                  1


#+ Third axis
[AXIS_2]

TYPE =                          LINEAR
HOME =                          0.000
MAX_VELOCITY =                  .36
MAX_ACCELERATION =              2.0
STEPGEN_MAXACCEL =              3.0
BACKLASH = 0.003
SCALE =                    -16000
OUTPUT_SCALE =   -16000
MIN_LIMIT =              -4.0
MAX_LIMIT =              4.0
FERROR =   0.050
MIN_FERROR =   0.010
HOME_OFFSET =                    0.0
HOME_LATCH_VEL =                 0.0
HOME_USE_INDEX =                 NO
HOME_IGNORE_LIMITS =             NO
#HOME_SEQUENCE =                  0

###############################################################################
# section for main IO controller parameters 
###############################################################################
[EMCIO]

#- Name of IO controller program, e.g., io
EMCIO =   io

#- cycle time, in seconds
CYCLE_TIME =            0.100

#- tool table file
TOOL_TABLE =            stepper.tbl

 

Revise this Paste

Your Name: Code Language: