Psst.. new poll here.
Psst.. new forums here.
Microsoft is blocking us again (TY IP Reputation!) so dont bother with any of their useless mail servers here and just use oauth login instead. Thank the nice Russians for causing that. :)
Paste
Pasted as Plain Text by chenger ( 14 years ago )
smartctl -a /dev/sda
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10 family
Device Model: ST3500630AS
Serial Number: 6QG3BD47
Firmware Version: 3.AAK
User Capacity: 500 107 862 016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Jan 21 14:32:45 2012 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 107 085 006 Pre-fail Always - 111038119
3 Spin_Up_Time 0x0003 097 093 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1285
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 066 044 030 Pre-fail Always - 515942251551
9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 14673
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1272
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 058 040 045 Old_age Always In_the_past 42 (0 25 42 38)
194 Temperature_Celsius 0x0022 042 060 000 Old_age Always - 42 (0 13 0 0)
195 Hardware_ECC_Recovered 0x001a 065 054 000 Old_age Always - 205556033
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 679 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 679 occurred at disk power-on lifetime: 10904 hours (454 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ee 57 38 ea
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ee 57 38 ea 00 01:28:18.278 SET MAX ADDRESS EXT
27 00 00 ee 57 38 e0 00 01:28:18.217 READ NATIVE MAX ADDRESS EXT
37 00 00 ee 57 38 ea 00 01:28:16.134 SET MAX ADDRESS EXT
27 00 01 ee 57 38 e0 00 01:28:16.075 READ NATIVE MAX ADDRESS EXT
37 00 01 ee 57 38 ea 00 01:28:15.850 SET MAX ADDRESS EXT
Error 678 occurred at disk power-on lifetime: 10904 hours (454 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ee 57 38 ea
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ee 57 38 ea 00 01:28:09.033 SET MAX ADDRESS EXT
27 00 00 ee 57 38 e0 00 01:28:08.648 READ NATIVE MAX ADDRESS EXT
37 00 00 ee 57 38 ea 00 01:28:16.134 SET MAX ADDRESS EXT
27 00 01 2f 60 38 e0 00 01:28:16.075 READ NATIVE MAX ADDRESS EXT
29 00 01 2f 60 38 e0 00 01:28:15.850 READ MULTIPLE EXT
Error 677 occurred at disk power-on lifetime: 10821 hours (450 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ee 57 38 ea
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ee 57 38 ea 00 00:14:43.132 SET MAX ADDRESS EXT
27 00 00 ee 57 38 e0 00 00:14:43.067 READ NATIVE MAX ADDRESS EXT
37 00 00 ee 57 38 ea 00 00:14:42.906 SET MAX ADDRESS EXT
27 00 01 ee 57 38 e0 00 00:14:42.837 READ NATIVE MAX ADDRESS EXT
37 00 01 ee 57 38 ea 00 00:14:36.840 SET MAX ADDRESS EXT
Error 676 occurred at disk power-on lifetime: 10821 hours (450 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ee 57 38 ea
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ee 57 38 ea 00 00:14:43.132 SET MAX ADDRESS EXT
27 00 00 ee 57 38 e0 00 00:14:43.067 READ NATIVE MAX ADDRESS EXT
37 00 00 ee 57 38 ea 00 00:14:42.906 SET MAX ADDRESS EXT
27 00 01 2f 60 38 e0 00 00:14:42.837 READ NATIVE MAX ADDRESS EXT
29 00 01 2f 60 38 e0 00 00:14:36.840 READ MULTIPLE EXT
Error 675 occurred at disk power-on lifetime: 10817 hours (450 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ee 57 38 ea
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ee 57 38 ea 00 06:06:30.050 SET MAX ADDRESS EXT
27 00 00 ee 57 38 e0 00 06:06:39.101 READ NATIVE MAX ADDRESS EXT
37 00 00 ee 57 38 ea 00 06:06:39.042 SET MAX ADDRESS EXT
27 00 01 ee 57 38 e0 00 06:06:38.818 READ NATIVE MAX ADDRESS EXT
37 00 01 ee 57 38 ea 00 06:06:38.750 SET MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 14583 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl -a /dev/sdb #системный
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000
Device Model: Hitachi HDS721075KLA330
Serial Number: GTF200P8G9W2SF
Firmware Version: GK8OA70M
User Capacity: 750 156 374 016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
Local Time is: Sat Jan 21 14:36:34 2012 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (11471) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 191) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 130 130 054 Pre-fail Offline - 151
3 Spin_Up_Time 0x0007 138 138 024 Pre-fail Always - 381 (Average 484)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1903
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 134 134 020 Pre-fail Offline - 32
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 12128
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1518
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1977
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1977
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Lifetime Min/Max 15/59)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay
smartctl -a /dev/sdc
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HDE721010SLA330
Serial Number: STN603MH11YL3W
Firmware Version: ST6OA31B
User Capacity: 1 000 204 886 016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Jan 21 14:36:54 2012 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (14090) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 235) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 115
3 Spin_Up_Time 0x0007 157 157 024 Pre-fail Always - 321 (Average 408)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1130
5 Reallocated_Sector_Ct 0x0033 093 093 005 Pre-fail Always - 293
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 123 123 020 Pre-fail Offline - 34
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 9407
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 925
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1240
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1240
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Lifetime Min/Max 13/57)
196 Reallocated_Event_Count 0x0032 088 088 000 Old_age Always - 369
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1238
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8850 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Revise this Paste