Welcome, guest! Login / Register - Why register?
Psst.. new poll here.
Psst.. new forums here.
Microsoft is blocking us again (TY IP Reputation!) so dont bother with any of their useless mail servers here and just use oauth login instead. Thank the nice Russians for causing that. :)

Paste

Pasted as Plain Text by me ( 14 years ago )
Wiphy phy0
 Band 1:
  Capabilities: 0x872
   HT20/HT40
   Static SM Power Save
   RX Greenfield
   RX HT20 SGI
   RX HT40 SGI
   No RX STBC
   Max AMSDU length: 7935 bytes
   No DSSS/CCK HT40
  Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  Minimum RX AMPDU time spacing: 4 usec (0x05)
  HT RX MCS rate indexes supported: 0-15, 32
  TX unequal modulation not supported
  HT TX Max spatial streams: 1
  HT TX MCS rate indexes supported may differ
  Frequencies:
   * 2412 MHz [1] (15.0 dBm)
   * 2417 MHz [2] (15.0 dBm)
   * 2422 MHz [3] (15.0 dBm)
   * 2427 MHz [4] (15.0 dBm)
   * 2432 MHz [5] (15.0 dBm)
   * 2437 MHz [6] (15.0 dBm)
   * 2442 MHz [7] (15.0 dBm)
   * 2447 MHz [8] (15.0 dBm)
   * 2452 MHz [9] (15.0 dBm)
   * 2457 MHz [10] (15.0 dBm)
   * 2462 MHz [11] (15.0 dBm)
   * 2467 MHz [12] (15.0 dBm) (passive scanning, no IBSS)
   * 2472 MHz [13] (15.0 dBm) (passive scanning, no IBSS)
  Bitrates (non-HT):
   * 1.0 Mbps
   * 2.0 Mbps (short preamble supported)
   * 5.5 Mbps (short preamble supported)
   * 11.0 Mbps (short preamble supported)
   * 6.0 Mbps
   * 9.0 Mbps
   * 12.0 Mbps
   * 18.0 Mbps
   * 24.0 Mbps
   * 36.0 Mbps
   * 48.0 Mbps
   * 54.0 Mbps
 Band 2:
  Capabilities: 0x872
   HT20/HT40
   Static SM Power Save
   RX Greenfield
   RX HT20 SGI
   RX HT40 SGI
   No RX STBC
   Max AMSDU length: 7935 bytes
   No DSSS/CCK HT40
  Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  Minimum RX AMPDU time spacing: 4 usec (0x05)
  HT RX MCS rate indexes supported: 0-15, 32
  TX unequal modulation not supported
  HT TX Max spatial streams: 1
  HT TX MCS rate indexes supported may differ
  Frequencies:
   * 5180 MHz [36] (14.0 dBm) (passive scanning, no IBSS)
   * 5200 MHz [40] (15.0 dBm) (passive scanning, no IBSS)
   * 5220 MHz [44] (15.0 dBm) (passive scanning, no IBSS)
   * 5240 MHz [48] (15.0 dBm) (passive scanning, no IBSS)
   * 5260 MHz [52] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5280 MHz [56] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5300 MHz [60] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5320 MHz [64] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5500 MHz [100] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5520 MHz [104] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5540 MHz [108] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5560 MHz [112] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5580 MHz [116] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5600 MHz [120] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5620 MHz [124] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5640 MHz [128] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5660 MHz [132] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5680 MHz [136] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5700 MHz [140] (15.0 dBm) (passive scanning, no IBSS, radar detection)
   * 5745 MHz [149] (15.0 dBm) (passive scanning, no IBSS)
   * 5765 MHz [153] (15.0 dBm) (passive scanning, no IBSS)
   * 5785 MHz [157] (15.0 dBm) (passive scanning, no IBSS)
   * 5805 MHz [161] (15.0 dBm) (passive scanning, no IBSS)
   * 5825 MHz [165] (15.0 dBm) (passive scanning, no IBSS)
  Bitrates (non-HT):
   * 6.0 Mbps
   * 9.0 Mbps
   * 12.0 Mbps
   * 18.0 Mbps
   * 24.0 Mbps
   * 36.0 Mbps
   * 48.0 Mbps
   * 54.0 Mbps
 max # scan SSIDs: 20
 max scan IEs length: 227 bytes
 Coverage class: 0 (up to 0m)
 Supported Ciphers:
  * WEP40 (00-0f-ac:1)
  * WEP104 (00-0f-ac:5)
  * TKIP (00-0f-ac:2)
  * CCMP (00-0f-ac:4)
 Available Antennas: TX 0 RX 0
 Supported interface modes:
   * IBSS
   * managed
   * monitor
 software interface modes (can always be added):
   * monitor
 interface combinations are not supported
 Supported commands:
   * new_interface
   * set_interface
   * new_key
   * new_beacon
   * new_station
   * new_mpath
   * set_mesh_params
   * set_bss
   * authenticate
   * associate
   * deauthenticate
   * disassociate
   * join_ibss
   * join_mesh
   * remain_on_channel
   * set_tx_bitrate_mask
   * action
   * frame_wait_cancel
   * set_wiphy_netns
   * set_channel
   * set_wds_peer
   * connect
   * disconnect
 Supported TX frame types:
   * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
   * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
   * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
   * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
   * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
   * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
   * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
 Supported RX frame types:
   * IBSS: 0x00d0
   * managed: 0x0040 0x00d0
   * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
   * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
   * mesh point: 0x00b0 0x00c0 0x00d0
   * P2P-client: 0x0040 0x00d0
   * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
 Device supports RSN-IBSS.

 

Revise this Paste

Your Name: Code Language: